Clinical Guide · Fat Grafting

Fat Grafting
in Breast Reconstruction

A comprehensive, evidence-based guide to autologous fat grafting (lipofilling) in implant-based breast reconstruction — covering technique, indications, oncological safety, and how EXAFAT delivers a closed-system solution for consistent results.

8 min read · ~1,600 words 📅 Last reviewed: 2026-07-21 Advanced Biomedical Concept Medical Team

What Is Fat Grafting?

Autologous fat grafting — also called lipofilling, lipomodelling, or fat transfer — is the surgical technique of harvesting adipose tissue from a donor site on the patient's own body, processing it to remove blood and oil, and injecting it into a target site to restore volume, correct contour irregularities, or improve tissue quality. Because the graft material is entirely the patient's own, there is no risk of immunological rejection and no introduction of synthetic foreign material.

In the context of breast reconstruction, fat grafting serves two primary roles: as a standalone reconstructive modality for small-volume defects, and — far more commonly — as an adjunct to implant-based reconstruction, where it corrects rippling, improves skin envelope quality, refines contour asymmetries, and enhances long-term aesthetic outcomes.

90%+
Surgeon satisfaction in multi-centre fat grafting series
0%
Foreign material introduced — fully autologous graft
30–70%
Average volume retention at 12 months
23+
Countries using EXAFAT closed-system

History and Evolution of Lipofilling

Fat grafting has a longer history than most surgeons appreciate. Early attempts date to the late 19th century, when Neuber (1893) transferred fat autografts to correct facial depressions. However, outcomes were highly unpredictable, and the procedure fell largely out of favour for much of the 20th century due to variable resorption, fat necrosis, and calcification concerns.

The modern era of fat grafting began with the pioneering work of Sidney Coleman in the 1990s, who established the foundational principles of atraumatic harvest, centrifugation-based processing, and small-aliquot microinjection — a methodology now known universally as the Coleman technique. Coleman's 2007 clinical series in Plastic and Reconstructive Surgery demonstrated that these principles, applied to the breast, yielded consistent, safe, and lasting volume augmentation.[1]

The adoption of fat grafting in breast reconstruction accelerated rapidly after 2010, driven by the convergence of improved harvesting cannula design, validated centrifugation protocols, and growing evidence on oncological safety in post-mastectomy patients. Today, lipofilling is considered an integral component of modern breast reconstruction, endorsed by both the American Society of Plastic Surgeons and the European Association of Plastic Surgeons.

How Fat Grafting Works: The Biological Mechanism

The survival of a fat graft is governed by a complex interaction between transplanted adipocytes, their stromal-vascular support cells, and the vascularity of the recipient site. Understanding this biology is essential for optimising graft take and avoiding complications.

The Adipocyte Survival Model

Upon injection, transplanted fat cells survive by direct plasmatic diffusion of nutrients from the surrounding tissue — a process that can sustain cells within approximately 1–2 mm of the graft surface. Adipocytes at greater distances from recipient vasculature undergo ischaemic necrosis, which is the primary driver of oil cysts, calcifications, and volume loss over time. This is why the Coleman technique's emphasis on small-aliquot, multi-pass injection in fan-shaped tunnels is mechanistically critical: it maximises the surface area-to-volume ratio of the deposited fat, improving cell-to-host interface contact.[1]

The Stromal-Vascular Fraction

Fat tissue contains far more than adipocytes alone. The stromal-vascular fraction (SVF) — comprising adipose-derived stem cells (ADSCs), endothelial progenitors, pericytes, and macrophages — plays an equally critical role in graft integration. ADSCs secrete pro-angiogenic factors including VEGF and HGF, stimulating neovascularisation within the graft zone. This explains an important clinical observation: irradiated tissues respond particularly well to fat grafting, as the ADSCs appear to remodel fibrotic, radiation-damaged stroma and stimulate local regeneration.[2]

"The therapeutic potential of fat grafting extends beyond simple volume replacement — it is an active biological process involving stem-cell-mediated tissue regeneration and vasculogenesis, with measurable effects on recipient tissue quality."

Rigotti et al., Plastic and Reconstructive Surgery, 2007

Volume Retention and Resorption

Volume retention varies widely in the literature — reported ranges of 30–70% at 12 months reflect differences in harvesting technique, processing method, injection volume per tunnel, recipient-site vascularity, and patient factors (BMI, smoking status, radiation history). Standardised closed-system processing, as provided by dedicated fat grafting systems, reduces variability by eliminating operator-dependent processing steps and minimising adipocyte trauma during preparation.

Clinical Applications in Breast Reconstruction

Fat grafting finds application at every stage of the breast reconstruction journey — from immediate prepectoral cases to delayed secondary refinements years post-mastectomy. The key indications are:

From Harvest to Injection: The Procedure

A successful fat grafting procedure consists of three distinct phases, each with specific technical requirements that determine graft viability. Standardised, closed-system instrumentation — as offered by EXAFAT — addresses the critical steps of each phase to reduce variability and improve reproducibility across surgeons and centres.

01
Harvest
Low-pressure, atraumatic lipoaspiration via blunt 3–4 mm cannulas from the abdomen, flanks, or thighs. Gentle suction (~200–400 mmHg) preserves adipocyte membrane integrity.
02
Processing
Centrifugation at 3,000 rpm / 3 min separates the aspirate into three layers: oil (top), viable fat (middle), and aqueous/blood (bottom). The viable middle layer is decanted for injection.
03
Injection
Microinjection in 0.1–0.3 mL aliquots via blunt-tip cannulas in retrograde, fan-shaped passes. Deposits ≤1–2 mm in diameter to maximise surface contact with recipient tissue.

The most technically sensitive step is processing. Open decanting systems expose fat to the theatre environment, risking bacterial contamination and oxidative damage to adipocytes. Dedicated closed-system devices — including the EXAFAT system — maintain sterility and process integrity from harvest cannula to injection syringe without transfer to open containers, reducing these risks while accelerating operative throughput. To understand the purification step in depth, see our dedicated guide to fat dialysis for breast fat grafting.

Fat Grafting vs. Alternative Approaches

Approach Advantages Limitations Best Indication
Autologous Fat Grafting No foreign material; regenerative effect; natural feel; repeatable Unpredictable retention (30–70%); donor site morbidity; may require multiple sessions Rippling, contour refinement, radiation sequelae, skin quality
Implant Exchange Immediate volume change; precise size selection General anaesthesia; capsulotomy risk; doesn't address skin quality Significant size revision or implant failure
Dermal Filler (off-label) Office-based; immediate result Not approved for breast; foreign body risk; migration concerns Not recommended in reconstructed breast
Flap Revision Robust, vascularised tissue; durable result Major operative undertaking; donor site morbidity Large volume deficits; radiation failure; failed implant reconstruction
ADM / Biological Mesh Structural support; rippling prevention at primary surgery Addresses coverage, not skin quality or existing rippling Primary prepectoral reconstruction (used alongside fat grafting)

EXAFAT — The Closed-System Fat Grafting Solution

ABC Product · EXAFAT
EXAFAT Fat Grafting System

EXAFAT is Advanced Biomedical Concept's dedicated closed-system fat grafting platform, developed to standardise every step from lipoaspiration to injection in a single, sterile, closed circuit. The system eliminates open decanting — reducing contamination risk and adipocyte trauma — while enabling efficient intraoperative volume management in breast reconstruction settings.

CE-Marked Closed System Atraumatic Harvest Standardised Processing 23+ Countries

Key System Features

Clinical Evidence

Oncological Safety: The Critical Question

The question that occupied reconstructive breast surgeons most intensely in the early 2010s was whether fat grafting near or within the breast of a cancer patient could stimulate tumour recurrence — via ADSC-secreted growth factors or by masking imaging findings. The evidence base has now substantially clarified this concern.

Petit et al. (2012),[3] in a multicentre study of 321 patients undergoing lipofilling after breast cancer surgery (including 59 with prior breast-conserving surgery), found no statistically significant increase in locoregional recurrence rates compared to matched controls over a mean follow-up of 26 months. Importantly, patients with in situ carcinoma showed a numerical but not statistically significant increase in events, leading the authors to advise caution in this subgroup — a position since adopted in most European guidelines.

Outcomes in Implant-Based Reconstruction

A systematic review and meta-analysis by Groen et al. (2016),[4] covering 1,330 fat grafting procedures across 18 studies, reported a complication rate of 8.6% for minor complications (oil cysts, palpable nodules, calcifications) and 3.5% for major complications requiring intervention. Patient satisfaction rates were consistently high — above 80% across studies — and implant complication rates were not increased by the addition of lipofilling. The authors concluded that autologous fat grafting is a safe and effective adjunct to implant-based breast reconstruction.

Technique and System Standardisation

Coleman and Saboeiro's landmark 2007 series[1] of 17 patients undergoing structural fat grafting to the breast demonstrated that adherence to atraumatic harvesting, centrifugation processing, and microinjection technique produced durable volume outcomes with acceptable complication profiles. The series established that outcomes are highly technique-dependent, and directly motivated the development of standardised closed-system platforms — including EXAFAT — designed to make reproducible Coleman-principle fat grafting accessible across surgical centres and experience levels.

Rigotti et al. (2007)[2] further demonstrated that fat grafting to irradiated tissue produces measurable improvement in skin quality and tissue pliability via ADSC-mediated regenerative mechanisms — broadening the indication beyond volume correction to include radiation damage management in the post-mastectomy setting.

Frequently Asked Questions

Common Questions

Is fat grafting safe in patients who have had breast cancer?
Current evidence — including the Petit et al. multicentre study (2012) — shows no statistically significant increase in locoregional recurrence in patients who receive lipofilling after breast cancer surgery. Most European guidelines permit fat grafting in this setting, with particular caution advised for patients with in situ carcinoma history. Patients should be counselled individually and followed with standard imaging protocols.
How much volume is retained after fat grafting to the breast?
Volume retention varies between 30% and 70% at 12 months across the published literature. Key determinants include harvesting technique (low-pressure vs. high-pressure aspiration), processing method (centrifugation vs. gravity decanting), injection volume per tunnel pass, recipient-site vascularity, and patient factors such as smoking status and radiation history. Standardised closed-system devices help reduce technical variability in processing.
How many fat grafting sessions are typically needed?
For focal corrections such as rippling or minor contour asymmetry, one to two sessions are usually sufficient. For larger-volume deficits or skin envelope expansion before reconstruction, three to five sessions at 3–6 month intervals may be planned. The EXAFAT closed system enables efficient intraoperative fat management, reducing procedure time and maximising available graft volume per session.
What is a closed-system fat grafting device and why does it matter?
A closed-system device keeps the harvested fat within a sealed, sterile circuit from aspiration through processing to injection — eliminating the open transfer steps (e.g., pouring fat between containers) that are standard in traditional Coleman-technique setups. This matters because open transfers expose fat to air and theatre contaminants, risk adipocyte trauma from turbulent transfer, and introduce inconsistency. EXAFAT is a dedicated closed-system platform designed to standardise these steps.
Can fat grafting be combined with a biological mesh like ExaShape?
Yes — and this is a common combination in prepectoral direct-to-implant (DTI) reconstruction. ExaShape provides structural coverage and pocket definition at the index operation, while EXAFAT fat grafting is used as a secondary refinement procedure 3–6 months later to address rippling, skin quality, or volume symmetry. The two products are complementary components of the ABC reconstructive platform.

References

  1. Coleman SR, Saboeiro AP. "Fat grafting to the breast revisited: safety and efficacy." Plast Reconstr Surg. 2007;119(3):775–785; discussion 786–787. DOI: 10.1097/01.prs.0000252001.59152.8a. PMID: 17312477. (Foundational fat grafting technique — Coleman series)
  2. Rigotti G, Marchi A, Galiè M, Baroni G, Benati D, Krampera M, Pasini A, Sbarbati A. "Clinical treatment of radiotherapy tissue damage by lipoaspirate transplant: a healing process mediated by adipose-derived adult stem cells." Plast Reconstr Surg. 2007;119(5):1409–1422. DOI: 10.1097/01.prs.0000256047.47909.71. PMID: 17415234. (ADSC-mediated regeneration in irradiated tissue)
  3. Petit JY, Botteri E, Lohsiriwat V, Rietjens M, De Lorenzi F, Garusi C, Rossetto F, Martella S, Manconi A, Bertolini F, Curigliano G, Veronesi P, Santillo B, Rotmensz N. "Locoregional recurrence risk after lipofilling in breast cancer patients." Ann Oncol. 2012;23(3):582–588. DOI: 10.1093/annonc/mdr158. PMID: 21610156. (Oncological safety — multicentre cohort study)
  4. Groen JW, Negenborn VL, Twisk DJW, Rizopoulos D, Ket JCF, Smit JM, Mullender MG. "Autologous fat grafting in onco-plastic breast reconstruction: A systematic review on oncological and radiological safety, complications, volume retention and patient/surgeon satisfaction." J Plast Reconstr Aesthet Surg. 2016;69(6):742–764. DOI: 10.1016/j.bjps.2016.03.019. PMID: 27067513. (Systematic review — safety, retention, satisfaction)

Advanced Biomedical Concept · EXAFAT

See EXAFAT in Your OR

Request a product demonstration, download the EXAFAT brochure, or speak with our clinical team about integrating closed-system fat grafting into your reconstruction workflow.

Request a Demo Explore EXAFAT

Questions

Frequently asked questions

What is autologous fat grafting in breast reconstruction?

Autologous fat grafting (lipofilling) transfers a patient's own fat — harvested by liposuction, processed, then reinjected — to restore volume and contour. In breast reconstruction it is used both as a standalone option for small-volume defects and, more commonly, as an adjunct to implant-based reconstruction.

Why does fat processing matter for graft survival?

Harvested fat contains blood, oil and fluid that can reduce graft quality. Gentle, closed-system processing that preserves adipose-derived stem cells and viable adipocytes is associated with better graft retention than aggressive handling. EXAFAT® uses 50-micron closed-loop microfiltration for this purpose.

How is EXAFAT® used in fat grafting?

EXAFAT® is a closed-loop fat dialysis and grafting system that harvests, filters (at 50 microns) and prepares autologous fat within a single sterile kit, aiming to maximise mesenchymal stem-cell viability and graft purity for breast procedures.

Is fat grafting an alternative to implants?

It can be, for suitable small-volume cases, and it is frequently combined with implant-based reconstruction to refine contour. Whether fat grafting is used alone or as an adjunct depends on the defect, tissue quality and patient factors.